$129–$179 is the typical four-wheel alignment price range with upfront pricing available at Coggin Honda Saint Augustine.

Pricing reflects a factory-spec four-wheel alignment performed with OEM-calibrated equipment and includes an inspection of suspension components. Coggin Honda Saint Augustine provides written before-and-after alignment readings and explains any additional repairs that could affect cost.

• Includes caster, camber, and toe adjustments to factory spec
• Before-and-after printed alignment report
• Suspension inspection and road test included

About 60 minutes is the typical time to perform a four-wheel alignment on a 2025 Honda CR-V.

This time includes a suspension inspection, computerized measurements, adjustments to factory specifications, and a road test. Severe suspension wear or additional repairs will extend the total service time; the service team at Coggin Honda Saint Augustine will advise you if extra work is required.

• Computerized alignment measurement and adjustment
• Suspension and tie-rod inspection
• Road test and before/after printout

Get an alignment every 2–3 years or about every 30,000 miles, and after suspension work or a major pothole impact.

Florida driving—heat, humidity, heavy rains and frequent potholes—can accelerate suspension wear and knock your alignment out of spec sooner. If you drive regularly on I-95 or local roads near Saint Augustine Beach, check alignment sooner after noticeable impacts.

• Every 2–3 years or ~30,000 miles as a general guideline
• After suspension component replacement or major impacts
• When you notice handling or tire wear symptoms

Common signs are uneven tire wear, the vehicle pulling to one side, an off-center steering wheel, or vibration at speed.

If you see tread wearing more on one edge, feel the steering tug toward a lane marker, or the steering wheel is noticeably off-center on straight roads around Saint Augustine, schedule an inspection. Local road hazards and curb contact often produce these symptoms.

• Uneven or cupped tire wear patterns
• Vehicle pulling left or right
• Off-center steering wheel or vibration at highway speeds

A four-wheel alignment for a 2025 Honda CR-V includes caster, camber, and toe adjustments to factory specifications plus before-and-after printouts and a suspension inspection.

Technicians use OEM-calibrated alignment equipment to measure and adjust front and rear geometry, verify tire pressures, and perform a road test. Coggin Honda Saint Augustine documents adjustments and explains any suspension repairs needed to maintain alignment results.

• Full caster, camber, and toe measurement and adjustment
• Tire pressure check, suspension and tie-rod inspection
• Before/after alignment printout and road test

Worn components such as tie rods, ball joints, or struts usually indicate more than an alignment is needed and must be repaired before alignment can hold.

Coggin Honda Saint Augustine technicians perform a suspension inspection before adjustment and will point out worn parts that prevent a stable alignment. In Northeast Florida, age and road conditions can accelerate wear on steering and suspension components that require replacement.

• Suspension inspection identifies worn tie rods, ball joints, and bushings
• Alignment performed after necessary repairs for long-term results
• Technician documents findings and provides an estimate for needed work

The 2025 Honda CR-V responds best to a factory-spec alignment performed with OEM-calibrated equipment. Coggin Honda Saint Augustine serves drivers across St. Augustine, Palm Coast, St. Augustine Beach, and surrounding Northeast Florida communities. Local conditions—heat, humidity, heavy storms, and frequent road repairs—can accelerate suspension wear and knock wheel angles out of spec.

During an alignment visit we check steering and suspension components, measure front and rear geometry, and adjust caster, camber, and toe to Honda factory specifications. If wear or damage is found, your service advisor will outline recommended repairs and provide an upfront estimate. For convenient planning, you can schedule service online or review current service specials.

Directions and contact details are available on the dealership site; bring your 2025 Honda CR-V to Coggin Honda Saint Augustine for a factory-spec alignment — schedule service.

A four-wheel alignment for the 2025 Honda CR-V follows a set process: initial vehicle intake and tire pressure check, full suspension and steering inspection, computerized measurement of caster, camber, and toe, precision adjustment to factory settings, and a final road test with a printed before-and-after report. Technicians verify that both front and rear angles meet Honda specifications and confirm the vehicle tracks straight on the road.

The service includes documenting any worn or damaged components discovered during inspection and explaining repair options and estimates. Coggin Honda Saint Augustine uses genuine Honda parts when replacements are required and advanced diagnostic equipment for accurate results. You can schedule service online or call the service center directly to arrange an appointment.

Alignment for the 2025 Honda CR-V focuses on caster, camber, and toe adjustments per factory specifications for both front and rear axles. Technicians use OEM-calibrated alignment racks and computerized targets to return steering geometry to Honda tolerances. Common issues we see on the 2025 Honda CR-V in Northeast Florida include toe-related tire wear and slight camber drift after curb contact or pothole strikes.

When required, the service team inspects tie rods, ball joints, struts, and subframe mounts to ensure alignment can hold. After adjustments, a before-and-after printout documents the corrected angles and a road test verifies steering center and vehicle tracking. Bring your 2025 Honda CR-V to Coggin Honda Saint Augustine in Saint Augustine for a factory-spec alignment — schedule service.